1095 Spring Steel Inch P1 2" - 12" Outside Diameter Inch | Precision Outside Diameter Tapes
Pi Tape® brand 1095 Spring Steel Outside Diameter measuring tapes are suitable for use with all materials and in non-corrosive environments. Pi Tape® brand Precision Outside Diameter tapes are manufactured to exacting standards in temperature controlled facilities at 68°F (20°C). The lines and numerals on our standard tapes are engraved and acid etched on a ground surface. The tapes have fixed readings that do not require periodic adjustments.
- Standard tapes have an accuracy of ± .001" up to 144” (± .03mm up to 3600mm)
Each Pi Tape® brand precision measuring tape is furnished with a Calibration Report whose measurement results are traceable through NIST to the international system of units (SI).
Not all items we calibrate are included in our scope, however the calibration techniques and procedures are all in compliance with ISO/IEC 17025:2017.
Pi Tape® - the original precision diameter measuring tape.
Specifications
- Gage Member: 0.25"
- Offset: 0.5"
- Material: 1095 Spring Steel
- Thickness: 010"
- Accuracy: ± .001”
Downloads
Outside Diameter 1095 Spring Steel Inch Purchase Options
Part # | Size | Gage Width | Thickness | Offset/Body Width
-
P000 | .500" - 2" | 0.25" | .007" | 0.5"
- P01 | .75" - 7" | 0.25" | .007" | 0.5"
- P02 | .75" - 9" | 0.25" | .007" | 0.5"
- P1 | 2" - 12" | 0.25" | .010" | 0.5"
- P1SP | 2" - 24" | 0.25" | .010" | 0.5"
- P2 | 12" - 24" | 0.25" | .010" | 0.5"
- P2SP | 12" - 36" | 0.25" | .010" | 0.5"
- P3 | 24" - 36" | 0.25" | .010" | 0.5"
- P3SP | 24" - 48" | 0.25" | .010" | 0.5"
- P4 | 36" - 48" | 0.25" | .010" | 0.5"
- P5 | 48" - 60" | 0.25" | .010" | 0.5"
- P6 | 60" - 72" | 0.25" | .010" | 0.5"
- P7 | 72" - 84" | 0.25" | .010" | 0.5"
- P8 | 84" - 96" | 0.25" | .010" | 0.5"
- P9 | 96" - 108" | 0.25" | .010" | 0.5"
- P10 | 108" - 120" | 0.25" | .010" | 0.5"
- P11 | 120" - 132" | 0.25" | .010" | 0.5"
- P12 | 132" - 144" | 0.25" | .010" | 0.5"