null, pub-0015564483429508, DIRECT, f08c47fec0942fa0

Durham Geo TB2-110 SoakEase 2in Refill Socks (Case of 12)

Price $141.98
Minimum Purchase:
1 unit

FREE SHIPPING (Continental US) | Estimated ship in 4-6 weeks
* Estimate is for US customers only.
* Shipping and Import Duties are calculated at checkout.
See Product Information

Frequently Bought Together

Please choose Options for all selected Products

TB2-110 DGSI 2-inch SoakEase™ Refill (case of 12 socks) | DGSI Slope Indicator Passive Remediation

SoakEase is a product-selective absorbent sock inside a stainless steel canister.

It is used as a passive collection system for free phase product such as jet fuel, gasoline or diesel fuel from 2.00 in (5.08cm) and larger recovery wells, monitoring wells and recovery trenches. SoakEase is 36 in (0.9 m) long and is available in two sizes to accommodate specific site requirements:

  • 2 in. absorbs 1 quart (0.95 L) of product per sock
  • 4 in. absorbs 3 quarts (2.8 L) of product per sock

The SoakEase can be used as a bailer for periodic product removal or as a dedicated system for a more continuous method of recovery. Prior to dedicating the SoakEase, it is recommended that excess free product be removed by bailing with the SoakEase.

The product absorption rate is determined by the viscosity of the product and can vary depending on site conditions. The SoakEase is designed to be used with hydrocarbon-based products. The user must determine the necessary replacement schedule by gauging site conditions. The socks can be squeezed out and reused. Approximately 80% of the original absorption can be recovered.

To use as a bailer

  • An absorbent sock is placed in the stainless steel canister, a cord is attached to the support loop and then lowered through the product layer.
  • The full length of the sock should come into contact with the product for greater recovery.
  • Immediately the SoakEase™ will begin absorbing product at a rate of approximately 0.1 gallon (0.38 L) per second, depending on the product viscosity.
  • After some time, the SoakEase should be raised from the well, the sock removed from the canister and disposed of in accordance with regulations.

To use as a dedicated system

  • It is necessary to determine the amount of product present using an oil/water interface indicator as well as the water table fluctuation.
  • When these have been determined, the SoakEase may be installed to accommodate level changes of up to 36 in (0.9 m).


Soakease applications include:

  • Passive LNAPL recovery
  • Absorbent material for immediate response or minimal product.


  • TB2-101 2″SoakEase Canister - 1.7″ OD x 39″ L
  • TB2-110 2″SoakEase Refill - Case of 12 Socks
  • TB4-101 4″SoakEase Canister - 3.5″ OD x 39″ L
  • TB4-110 4″SoakEase Refill - Case of 12 Socks

2" Model | 4" Model

  • Outside Diameter: 1.7 in | 3.5 in
  • Length: 36 in | 36 in
  • Weight (Net): 3.0 lb 6.0 lb
  • Canister Material: Stainless Steel Type 304, perforated
  • Absorbent Sock Material: Polypropylene fibrous material contained in a white fabric sock
  • Rated Absorption:
    • 2 in Socks: 3 US gal per case (1 qt per 2" sock)
    • 4 in Socks: 9 US gal per case (3 qt per 4" sock)
  • Incompatibility: Slight degradation may occur if exposed to strong oxidizing agents
  • Warning: Not recommended for use with aggressive fluids, including strong acids, strong bases, oxidizers and hazardous materials
  • Reaction time: Immediate




 Durham Geo TB2-110 SoakEase 2in Refill Socks (Case of 12)

Durham Geo TB2-110 SoakEase 2in Refill Socks (Case of 12)

//Initialize Klaviyo object immediately on page load //Added to Cart