MAKO FinCap Screed Support without Base Plate 4.5 (100/Bag)
- Includes 100 FinCaps and 100 FinStands
- Supports 1-1/2″ (40 mm) Pipe (1.5″ ID/1.9″ OD)
- Stay-in-place forms adjust vertically 1-3/4″ (45mm)
- Threaded rod cut to length determines the height. See Slab Depth Chart
- Space 3-4′ apart (1m).
- The minimum height of the assembly using a 1-1/2” ID pipe from the bottom of the FinS and to the finished elevation of concrete is 4 - 5/8” (1 17 mm)
- Use steel threaded rod for slabs over 8′′ (200mm)
- Threaded rods sold separately
- For use on elevated decks, sloped slabs, bridges, super flat floors, and more
- Non-conductive and non-corrosive construction makes them ideal to use in bridge decks, waterways, and power plant concrete projects.
- 100 FinCaps and FinStands per box, enough for 3,000 sf (278 sq m) slab
- Made in USA
FINCAP
The MAKO FinCap is a patented, non-metallic cap designed to fit securely onto a ½” x 13 threaded rod, which attaches to the FinStand. It supports a nominal 1-1/2″ (40 mm) galvanized pipe (schedule 40 or higher) with a 1.5″ ID and 1.9″ OD.
FinStand
The FinStand is made from durable, impact-resistant material, making it virtually unbreakable. It supports a 1/2″ all-thread and can be adjusted by 1.75″ (45 mm) using a nut and washer to accommodate deck variations. Refer to the chart below for the appropriate rod length based on your desired floor depth. Its internal "fins" hold the rebar or stake securely in place, preventing it from bouncing during placement. The FinStand can be fastened to a metal deck using #8 or #10 tek screws or to a wood deck with nails.
For precise setup every time, pair the MAKO Driver with JAWS Small Screed Chairs.
