Shelby Tubes for Undisturbed Soil Sampling
What a Shelby Tube Does
A Shelby tube is a thin-walled steel tube pushed into fine-grained soil to recover a relatively undisturbed sample for laboratory strength, consolidation and permeability testing. Thin-walled tube sampling is commonly performed under ASTM D1587; confirm the method and tube requirements your project specifies.
Choose the Diameter and Length
Tubes are listed in 2in, 2.5in, 3in, 3.5in and 5in diameters, in lengths from 10in to 36in. Match the diameter to the specimen size your lab tests need and to your drilling setup. For example, compare the 2in x 30in tube, the 3in x 36in galvanized tube and the 5in x 30in tube. Check each listing for material and finish.
Match the Drive Head to Your Drill Rod
The drive head connects the tube to the drill string, so it must match both the tube diameter and the rod thread. Drive heads are listed for AW, AWJ and NW rod, such as the 2in head for AW rod, the 3in head for NW rod and the 5in head for NW rod, plus a 3in E rod drive head.
Seal and Protect the Sample
Seal tubes promptly to hold moisture and limit disturbance in transport. Use expansion packers and plastic end caps sized to the tube, and sealing wax where your procedure calls for it. Store and ship tubes upright and protected from shock and freezing.
Extrude and Test in the Lab
The sample extruder for Shelby tubes pushes the soil out for trimming and testing. For permeability testing in the tube itself, compare the 2in, 2.5in and 3in Shelby tube permeameters and their matching filter papers.
For other sampling tools, see soil augers for sampling.