The Lab Companion DLH-01G Ductless (Small) Fume Hood is a safe and energy-saving mobile workspace free from toxic vapors and fumes without the need of costly ductwork. Meeting or exceeding various international safety standards.
Safety Standards Compliance
- Efficiency and capacity of activated carbon filters : BS 7989:2001)
- Structure, electrical outlet, lighting, and sound level : BS 7258-1:1994
- Local smoke, large volume visualization, face velocity, and tracer gas
:ANSI/ASHRAE 110-1995 and NF EN 14175-1
Constructional Features
- Easy monitoring of the internal airflow speed thanks to the built-in anemometer
- Convenient change of filter cartridges by opening the upper front cover
- Fully or half openable front door for convenient transport of experimental apparatuses and equipments into or out of the workspace
- Large-capacity blower maintaining sufficient intake flow rate and reducing noise
(less than 55 dB under normal operation) - Fluorescent light installed outside the workspace in order to prevent the airflow hindrance as well as the contamination while maintaining illumination intensity
- Built-in utility hole for easily routing the cords or wires of the equipments placed inside the hood
Specifications
- Fume Hood Type: Ductless
- Permissible Environmental Condition: Temperature 5C to 40C. Maximum relative humidity 80%, Maximum altitudes 2,000m
- Controller: Microprocessor control
- Face Velocity: Initial set point: 0.4m/s, 80fpm
- Air Flow Meter: Swing vane type
- Main Filter: Chemical Filter (optional 6 different filters)
- Pre Filter: Washable high efficiency nylon filter
- Materials
- Main Body: 2.0mm steel (epoxy powder-coated)
- Work Surface: Optional 6 different work surfaces
- Window (Front / Side): 8mm / 6mm Tick acrylic resin
- Fluorescent Light Intensity: > 600lux
- Noise Level: 55dB under normal operation
- Dimension
- Internal (mm/inch): 880×640×800 / 34.6×25.2×31.5
- External without Stand (mm / inch): 900×660×1250 / 35.4×26×49.2
- External with Stand (mm / inch): 900×660×1985 / 35.4×26×78.1
- Net Weight (Body) (kg / lbs): 100 / 220.5
- Net Weight (Body+Stand) (kg / lbs): 120 / 264.6
- Electrical Requirements: 120V, 60Hz / 1.3A