Thermolyne Benchtop Muffle Furnace with Ceramic Insulation, 2.1L
Used for ashing, ignition tests, gravimetric analyses and volatile matter determinations. For construction materials, furnaces are used for testing soils, aggregates and cement. Has rugged components and top quality materials to ensure long life. Maximum temperature 2192F (1200C), 0.07 cu ft chamber.
Single set-point control with ramp to set-point and dwell at set-point. Display shows actual maximum temperature uniformity or set-point. Over-temperature protection and 0.3in (7.6mm) LED digital display for °C or °F.
This furnace has elements in sides, tops and/or bottoms. Since doors and backs have no elements, only the center two-thirds of the chamber is considered uniform in maximum temperature uniformity and chamber size should be selected accordingly. Safety interlock door switches. Power to elements is cut off when door is opened. Comes with cord and plug. Line cord is included with the equipment.
0.07ft³ (2L) capacity, 212-2192F (100-1200C)
Benchtop has built-in port to remove moisture and contaminants from the heating element and furnace. Muffle furnaces have thermocouple break protection, two open-coil heating elements for fast heat-up, thermal efficient ceramic insulation, oven door safety switch, power cord and 0.31in (7.8mm) rear port to monitor chamber max temperature.
Each unit is used for ashing, ignition tests, gravimetric analyses and volatile matter determinations. Also used for testing soils, aggregates and cement. Comes with power cord, hearth tray and digital single setpoint controller. Available in two sizes to fit your needs.
Features:
-
Solid construction for long life
-
Internal oven safety features
-
General lab use
Included Items:
-
Muffle Furnace (120V, 50/60Hz or 240V, 50/60Hz)
Accessories:
-
Crucible Tongs to remove beakers and other labware from furnace
-
Porcelain Crucibles for loss-on-ignition testing of cement, fly ash and soils. 10, 30, 45mL
-
Heat Resistant Gloves to protect operator when placing or removing items in furnace
Specifications:
Capacity 0.07 cu ft.
CSA approved
Description FB1415M
Capacity 2.1 L
Actual Temperature Uniformity 100C to 1200C
Type Single Setpoint
Power 1450 w
Temperature Uniformity Stability 0.5 at 1000C (5.0 at 1000C)
Inner Dimensions 6 x 5 x 4.25 in. (13 x 12.7 x 10.8 cm)
Outer Dimensions 15.8 x 10 x 14.5 in. (40 x 25 x 37 cm)
Length 15.8 in.
Length 40 cm
Width 5 in.
Width 25
Width Inner 12.7 cm
Height 14.5 in.
Height Inner 4.25 in.
Height 37 cm
Height Inner 10.8 cm
Depth Inner 6 in.
Depth Inner 13 cm
Electrical 120 V 50/60 Hz
Voltage 120 V
Frequency 50/60 Hz
Overview
Benchtop muffle furnace is a general purpose tool for laboratory and industrial use. Provides controlled environment for heat treatment, ashing and other high temperature processes. Compact for small scale operations, research and development. Solid construction for durability and reliability. Whether you’re testing or experimenting a muffle furnace gives you the precision and efficiency to get accurate results.
Features
Our benchtop muffle furnace has:
-
High temperature: Up to 1100C for many ultra high temperature applications
-
Ceramic fiber insulation: For high thermal efficiency and low heat loss
-
Thermocouple failure runaway condition protection: Safety first, our furnace has protection against thermocouple failure runaway conditions.
-
Single display: Easy to use single display for temperature and other parameters.
Applications
Our benchtop muffle furnace is used for:
-
Ashing organic and inorganic samples: For ashing both organic and inorganic samples. Laboratories and research institutions.
-
Gravimetric analysis: For gravimetric analysis, to measure sample weight for accurate data.
-
Ignition tests: For ignition tests, for materials testing and research, to get reliable results.
-
Heat treatment: For heat treatment of small steel parts, for industrial applications where precision is required.
-
Volatile and suspended solids: For environmental testing and research, to determine volatile and suspended solids, for analysis.
