Concrete Field Test Kit: Fresh Starter Kit

Concrete Field Test Kit: Fresh Starter Kit

Fresh Concrete Field Test Starter Kit Includes:

• Type B Concrete Air Meter

• Polyethylene case with inner reinforced walls to hold the meter

• Calibration Vessel

• Outside Tube

• Inside Tube

• Graduated Strike Off Bar

• 24” Long Tamping Rod 5/8” diameter rounded to a hemispherical tip at both ends

• 3 oz. Bulb Syringe

• Rubber Mallet

• Ultra-Pump Wrench

• Economy Poly Slump Base with Clamps

• Base Plate: Flat surface for accurate slump and unit weight tests.

• Spun Steel Slump Cone

• 38 oz. Round Bottom Scoop

• 250 mL Squeeze Bottle

• 12” x 1/2” PVC Strike Off Plate

• Pocket Dial Concrete Thermometer

• 3/8 x 12” Rod (for 4x8” cylinders)

This Concrete Air Meter is one of the most accurate air content measuring devices available. Heat-treated cast aluminum construction and cast-in handles on the base make it heavy-duty yet lightweight. The best clamping system available with large stainless-steel clamp levers and 2500 lb. holding capacity per lever. Easy and dependable operation.

Ultra Pump for high volume operation. Larger, more accurate pressure gauge with safety glass and bold color dial face, color-coded for entrapped and entrained air readings.

Each comes with carrying case, instructions and equipment to perform calibration and concrete tests. Each meter is pressure tested and calibrated before shipping and each meter is assigned a customer serial number.

This kit includes fresh concrete testing equipment to measure slump, air content and unit weight in the field. Measure key properties of fresh concrete to ensure quality and compliance. Measuring setting time is also part of field testing procedures to ensure proper curing and meet construction schedules.

• AASHTO T152, T-119

• ASTM C143See all Concrete Slump Testing Equipment, Slump Cones, Fresh Concrete Testing.

Concrete Air Entrainment Test Accessories:

• Rods for Slump Cone Test: Hemispherical tipped rods used to consolidate concrete specimens in slump, air content and strength tests.

• Concrete Strike-Off Bar: To remove excess material.

• Gauges in Air Meter Parts: Quality gauges that fit most Type B Air Meters.

• Replacement Air Pump: Fits Gilson Air Meters (and other manufacturers) with solid construction for longer life.

• Other: Additional measurement tools and fixtures available for complete concrete field testing.

This starter kit is for professionals who do field testing on fresh concrete. Made in the USA and has everything you need to do accurate and reliable concrete testing. Whether you’re an experienced contractor or new to concrete testing the Fresh Concrete Field Test Starter Kit has all the essentials in one package. It’s for quality control in construction projects to ensure compliance and durability.

What is Concrete Testing

Concrete testing is part of the construction process to ensure concrete structures are built to last and meet all specifications and industry standards. By testing the strength, workability, consistency and other properties of concrete construction professionals can guarantee the quality and safety of their projects. Fresh concrete testing is testing the properties of concrete immediately after mixing and before it hardens, using tests such as slump and compressive strength. Laboratory testing is testing concrete specimens under controlled conditions to evaluate their long term performance. Using the right concrete testing equipment—concrete test hammers and compression machines—gives accurate and reliable results. These tests are to verify that concrete meets the required standards for strength and consistency to ensure durability and integrity of concrete structures.

What’s in the Starter Kit

The Economy Fresh Concrete Field Test Starter Kit is for professionals working with fresh concrete. This all-in-one kit has everything you need for concrete testing including air meter, temperature probe, unit weight bucket and other equipment for complete fresh concrete testing. Portable design for easy transport and use on any job site. Meets industry standards ASTM and AASHTO. With this starter kit you have everything you need to test unit weight, workability and other properties of fresh concrete to maintain quality and compliance from field to lab.

Concrete Curing and Quality Control

Concrete curing is important to achieve the desired strength, durability and stability of concrete structures. Curing is maintaining the optimal moisture and temperature conditions for the concrete to develop its full potential. Quality control during this phase is critical to ensure the concrete meets all specifications and standards. Tools like curing boxes and curing tanks regulate the curing environment while regular strength tests including compressive and flexural strength tests give you feedback on the concrete’s performance. Non-destructive testing methods like penetration resistance allow you to evaluate the concrete properties without damaging the structure. By implementing strict quality control and using the right equipment you can ensure your concrete meets the project requirements.

Concrete Properties

Monitoring concrete properties is important to ensure structures perform as expected throughout their life. Properties like workability, consistency, compressive strength and flexural strength are tested through concrete testing and laboratory testing. Using advanced concrete testing equipment like air meters, compression machines and concrete test hammers allows for precise testing. Non-destructive testing methods like ultrasonic and impact echo testing give you valuable information about the concrete without damaging the structure. Regular monitoring helps you identify potential problems early so the concrete meets all specifications and standards. This proactive approach leads to better pavements, buildings that last.