2in Unbonded Capping Neoprene Pad Cap, 50 Durometer
Sold individually. Two are required for compression testing of concrete cylinders. Choose 12 for one box.
The 2in (50.8mm) Neoprene Pads are 0.5in (12.7mm) thick and available in 50 or 70 durometers. They are used for compressive strength testing of 2in concrete cylinders. The pads flow during compression to fill irregularities in cylinder ends and ensure load uniformity. The 2in Steel Retainer Set is purchased separately and has two rings to hold one pad at each end of the concrete cylinder. Each pad can be used for up to 100 tests, and two pads are required for a single test. Each of these models can also be used with 2.125in (54mm) dia. rock cores.
The 2in, 50 Durometer Pads work well in testing concrete strengths from 1,500-6,000psi (10-40mPa).
Compression pads are available in several hardnesses.
- 50 duro for design strength 1500 to 6000 psi
- 60 duro for design strength 2500 to 7000 psi
- 70 duro for design strength 4000 to 12000 psi
Per ASTM C1231, the pad can be reused up to a maximum of 100 times.
Meets Test Methods:
AASHTO T22
ASTM C 1231
View the full line of Concrete Capping and Unbonded Cylinder Capping
Related Blogs for Unbonded Cylinder Capping:
Essential Steps for Capping Concrete: A Hassle-Free Guide
Benefits of Capping Compound for Concrete Cylinder Testing
Unbonded Caps for Concrete Cylinders: Low-Strength Breaks
The 2in Unbonded Capping Neoprene Pad Cap, 50 Durometer is a high-quality and essential product for compression testing of concrete cylinders. Sold individually, each cap is required for the testing process, and you can choose to buy a box of 12 if needed.
These Neoprene Pads measure 2 inches (50.8mm) in diameter and are 0.5 inches (12.7mm) thick, making them suitable for testing 2-inch concrete cylinders. The pads are available in two different durometers - 50 and 70. The 50 durometer pads are recommended for concrete strengths ranging from 1,500 to 6,000psi (10-40mPa). These pads are specially designed to flow and fill irregularities in cylinder ends during compression, ensuring load uniformity.
To securely hold the pads in place, the 2in Steel Retainer Set is required. The retainer set, which can be purchased separately, consists of two rings that hold one pad at each end of the concrete cylinder. This setup guarantees accurate test results.
The 2in Unbonded Capping Neoprene Pad Cap is not limited to concrete cylinder testing only. It can also be used with 2.125in (54mm) diameter rock cores for various testing purposes.
These pads are made to last, with each pad being capable of up to 100 tests. As per ASTM C1231 standards, the pad can be reused for a maximum of 100 times.
The 2in Unbonded Capping Neoprene Pad Cap meets the test methods AASHTO T22 and ASTM C 1231, ensuring its compliance with industry standards.
To explore more concrete capping options and related products, you can visit our website and view our full line of Concrete Capping and Unbonded Cylinder Capping.
For more information and helpful tips, you can also check out our related blogs on capping concrete and the benefits of capping compound for concrete cylinder testing.
Invest in the reliable and durable 2in Unbonded Capping Neoprene Pad Cap, 50 Durometer for accurate and efficient compression testing of concrete cylinders.
