Thermolyne F6010 Muffle Furnace, Max. Temp. 2192F, 14L, 3095W

Thermolyne F6010 Large Muffle Furnace with Four Heating Elements, Max. Temp. 2192F, 14L, 3095W

This Thermolyne Premium Large Muffle Furnace is used for ashing, ignition tests, gravimetric analyses, and volatile matter determinations. For construction materials, furnaces are used for tests of soils, aggregates, and cement. This unit has rugged components and top-quality materials to give the longest service life. Max. temp is 2192F (1200C) and chamber capacity is 14L. If you are looking for replacement parts, the Thermo Scientific site has a list of frequently requested parts so even discontinued products can be serviced efficiently.

The programmable controller operates like single set-point controllers but can be programmed to ramp up or down and dwell for constant temperature periods. This model also has over-temperature protection. It has 2-ramp/2-dwell program capability and 0.3in (7.6mm) LED digital display in °C or °F.

Muffle Furnace has 0.5ft (14.2L) capacity and monitoring chamber temperatures range 212–2,192°F (100–1,200°C).

• Crucible Tongs to remove beakers and other labware

• Porcelain Crucibles for loss-on-ignition testing of cement, fly ash, and soils are available in 10, 30 or 45mL

• Heat Resistant Gloves for operator protection when placing or removing items in the furnace

Specifications:

Capacity 0.5 cu.ft.

CSA approved

Description F6010

Capacity 14.2 L

Temperature 100C to 1200C

Type Single Setpoint with Ramp and Programmable

Power3095 w

Amps 12.9

Temperature stability0.3 at 1000C (2.2 at 1000C)

Dimensions (D x W x H) Inside 10 x 12.8 x 6.8 in. (25 x 33 x 18 cm)

Dimensions (L x W x H) Outside 20.1 x 19.1 x 21in. (51 x 48.5 x 53.3 cm)

Electrical Requirements240 50/60 Hz

Voltage 240 V

Frequency 50/60 Hz

Features: Digital Single Setpoint

Thermo Scientific F6010 Thermolyne Furnace A1 14L has the following features:

1. Digital Single Setpoint: Digital single setpoint control allows you to control the temperature. Better results, easier to get what you want in your experiment.

2. High Temperature: 212–2,192°F (100–1,200°C). Great for general heating and thermal processing.

3. Four heating elements on top, bottom and sides for even heat and better results.

4. Vent Port: Built-in vent port for safe and controlled ventilation to remove moisture and contaminants to extend life of heating elements.

You can buy the heating block for Lab Heaters to heat or cool DNA and other samples.

Safety and Maintenance

Thermo Scientific F6010 Thermolyne Furnace A1 14L | 0.5-cu ft has safety and maintenance features:

• Protection mechanism cuts power to furnace in case of emergency

• Chamber top and sides prevent moisture and contaminants from entering

• CSA approved

Please contact manufacturer or qualified technician for maintenance or repair. Improper handling can void warranty and compromise user safety.

Thermo Scientific Design and Summary

Thermo Scientific F6010 Thermolyne Furnace A1 14L | 0.5-cu ft is designed and built by Thermo Scientific. Large muffle furnace, digital single setpoint, temperature uniformity. Perfect for industrial applications, ash organic and inorganic samples, gravimetric analysis. Chamber has heating elements for temperature control, rear port for easy access and maintenance. Thermo Scientific attention to detail and quality ensures this product meets performance, safety and reliability standards. Whether you are a researcher, scientist or laboratory technician, Thermo Scientific F6010 Thermolyne Furnace A1 14L | 0.5-cu ft is for you, precision, reliability and safety.