Temperature/RH Logger with Probe

These temperature and relative humidity data loggers are housed in a robust, waterproof (IP68-rated) case, which is designed for use in harsh applications like cylinder curing rooms. They are available with an integral, coated RH sensor (H-2736) or with a temperature and relative humidity probe with a 1.5m cable length (H-2732). The relative humidity probe features a coated RH sensor that shows good resistance to moisture and condensation, ensuring measurement reliability. These data loggers have a high reading resolution and accuracy and provide fast off-load speed and a low battery monitor. Data is downloaded to a computer for viewing, reports and archiving. Data stored on the logger will be retained after a battery is replaced. See tables below for specific logger specifications. Require H-2736.SW software and a download cable for operation. Dimensions: 1.75" x 2.25" x 3.15" (34 x 57 x 80mm)

Specifications

Reading Capacity        32,000

Memory Type Non-volatile 64K

Reading Types Actual, Min, Max

Delayed Start  Relative / Absolute

(up to 45 days)

Trigger Start    Magnetic Switch (H-2736.3)

Alarms 2, fully programmable

Stop Options   When full, After "n"

Readings, Never

overwrite oldest data

Operating Range         -40°F to +185°F

-40°C to +85°C

Battery User-replaceable Lithium

Temperature Specifications

Sensor 10K NTC Thermistor

Range  -13 to 185°F (-25 to 85°C)

Response Time            25 mins to 90% FSD in moving air

Accuracy         0.01°C or better

Relative Humidity Specifications

Sensor Type    Capacitive

Reading Range 0 to 100% RH

Accuracy         ±3.0% at 77°F (25°C)

Reading Resolution     Better than 0.3% RH

Sensor Location          Externally mounted

Response Time            10 seconds to 90%

View the full line of Concrete Curing Equipment