Marsh Funnel Viscometer for Cement

Marsh Funnel Viscometer for Cement

The marsh funnel viscometer is a tough, easy to use instrument to make quick, on the spot measurements of drilling mud viscosity. The Marsh Funnel Viscometer is a rugged, easy-to-operate instrument designed for quick on-site measurements, so mud engineers can quickly assess drilling mud properties. Calibration temperature is key when using this instrument. Marsh funnel readings are only general measurements, but frequent reporting of the marsh funnel viscosity is important to quickly identify any changes in the mud viscosity that may require corrective action. The marsh funnel measurement is the ratio of the speed as it goes through the outlet tube (the shear rate) to the amount of force — the weight of the mud itself which is pushing (the shear stress). Marsh funnel viscosity is measured by timing how long it takes for a specific volume of mud to pass through the funnel. The standard measurement is the number of seconds it takes (seconds required) for one quart of mud to pass. The results are reported to monitor properties and ensure proper drilling operations.

The Marsh Funnel Viscometer for Cement is a rugged and easy to use instrument to make quick and accurate measurements of drilling mud viscosity. It’s a must have for engineers and technicians in the field to get an idea of the relative viscosity.

The marsh funnel readings from this viscometer gives a general measurement, so you can identify any sudden changes in the mud viscosity that needs immediate attention. Such changes may require corrective action. The viscosity of the mud is the ratio of the speed of the mud as it goes through the outlet tube (the shear rate) to the amount of force — the weight of the mud itself which is pushing the mud (the shear stress). The marsh funnel is the number of seconds it takes for one quart of mud to flow out of a full marsh funnel. This instrument also supports real time measurements, so it’s very useful in field operations. Frequent reporting of marsh funnel helps identify issues that may require action.

This marsh funnel viscometer is tough and durable, built to last in the toughest conditions. Easy to use, it’s perfect for professionals and novices alike. It gives accurate and consistent measurements so you can make reliable decisions.

At Certified MTP, we have a wide range of cement test equipment and the Marsh Funnel Viscometer for Cement is one of them. Whether you need cube molds for concrete, cement, mortar, and grout or supplies for grout testing, flow and density, we have you covered.

We also have a full line of asphalt binder testing equipment, Brookfield viscometers and other asphalt testing supplies. Our goal is to provide our customers with the equipment they need.

For measuring drilling, trust the Marsh Funnel Viscometer for Cement from Certified MTP. It’s a tough and reliable tool to help you maintain your quality and performance. Improve your operations and protect your equipment with this one.

Marsh Funnel Viscometer

The Marsh Funnel Viscometer is an industry standard in the oil and gas industry to measure drilling fluids viscosity. It’s tough and easy to use to make quick on the spot measurements, very useful in field operations.

One of the key feature of the Marsh Funnel Viscometer is it can measure the relative measurement of drilling fluids, a critical factor in designing and optimizing drilling fluids. The device is calibrated to flow one quart (946 mL) of fresh water at 70 ± 5°F (21 ± 3°C) to give consistent and reliable readings.

The Marsh Funnel Viscometer consists of a cone-shape with a tube at the end. Made of tough plastic, the Marsh Funnel Viscometer is built to withstand field use without breaking or cracking. It has a brass orifice to give consistent readings and accurate measurements. The size of the device, measuring 6.5” × 6.25” × 14.5” (17 × 16 × 37 cm) and weighs 12 oz (340.2 g), makes it portable and easy to handle.

A brass 12-mesh screen covers half of the top to remove foreign matter and drilled cuttings. The test liquid is poured through the mesh to ensure proper measurement. During measurement, the user’s finger is used to temporarily close the tube at the end before starting the test, allowing precise control of the fluid release.The Marsh Funnel Viscometer is used to measure the flow properties which is key to efficient drilling. Its simplicity and cost effectiveness makes it a popular choice for real time measurements so engineers can make quick decisions. The Marsh Funnel Viscometer is used in the gas industry to provide critical data to maintain quality and performance.