Dayton Pro Poxy 200 Epoxy Adhesive, 1 Gallon

Dayton Superior Pro-Poxy 200 Structural Epoxy Adhesive, 1 Gallon (140091)

Dayton Superior Pro-Poxy 200 (product code 140091, 1-gallon unit) is a 100% solids, two-component, high-modulus, medium-viscosity, moisture-tolerant structural epoxy adhesive. It meets ASTM C881 and AASHTO M235 and can be applied at temperatures from 40°F to 100°F.

Its primary use is bonding fresh concrete to hardened concrete. It is also used to anchor bolts, dowels and reinforcing steel in concrete, and, when mixed with clean, dry silica sand, as an epoxy mortar for interior patching. The medium-viscosity formula is pumpable and adheres to most construction materials. Dayton Superior lists the product as acceptable for use in USDA-inspected facilities and UL certified for drinking water system components under NSF/ANSI/CAN 61, with a VOC content of 0 g/L.

Mix equal volumes of Component A and Component B for three minutes with a low-speed drill and paddle, and mix only what can be placed within the pot life. For bonding new concrete, brush or roll the adhesive onto a clean, sound substrate and place the fresh concrete while the epoxy is still tacky. Not recommended for anchoring or doweling applications under sustained tensile load. For professional use only; do not thin with solvents.

Specifications

• Manufacturer: Dayton Superior (Unitex line), product code 140091
• Package: 1 gallon (3.8 L) unit
• Type: 100% solids, two-component structural epoxy adhesive
• Standards: ASTM C881 / AASHTO M235
• Mix ratio: 1:1 by volume (A:B)
• Pot life: 30 minutes (1 gallon at 75°F)
• Coverage: approx. 80 sq ft per gallon at about 20 mils
• Application temperature: 40°F to 100°F
• Shelf life: 24 months unopened, stored at 40°F to 95°F

Typical Uses

• Bonding fresh concrete to hardened concrete
• Anchoring bolts, dowels and reinforcing steel in concrete
• Epoxy mortar for interior patching when mixed with silica sand