Dayton Clean Strip J2 Concrete Form Release Agent, 55 Gallon

Dayton Clean Strip J2 Concrete Form Release Agent, 55 Gallon

Clean Strip™ J2 is a ready-to-use, petroleum based, chemically reactive liquid concrete form release agent that meets V.O.C. content regulations, so you can meet environmental standards. Clean Strip J2 is a general purpose product that works on all forms and form liners for all general construction. Using Clean Strip J2 regularly will extend the life of all forms.

Product Overview

When it comes to getting a clean release in concrete construction, BLUE BEAR 800GP and Pro-Release 3.0 are top of the line, general purpose release agents. Formulated for use on all forms—wood, plywood, steel, aluminum, fiberglass, plastic—these non-staining agents ensure concrete separates from the form every time. By preventing bonding and sticking, they keep the concrete surface and form intact, reducing the risk of marks or damage.

These release agents are easy to apply and deliver great wetability so they coat forms evenly and get into fine details with minimal dusting. This means a better finish and less time spent on cleanup or dealing with buildup. Whether you’re working with traditional wood forms or more specialized materials like fiberglass or aluminum, these products perform and extend the life of your forms. For contractors looking for a reliable solution for concrete form release, BLUE BEAR 800GP and Pro-Release 3.0 have you covered.

Features

Clean Strip™ J2 is V.O.C. compliant so you meet environmental regulations. Petroleum based and chemically reactive for smooth workflow. Non-staining so surface is clean and paintable after application. The result is a clean, surface ready for painting or finishing.

Benefits

Say goodbye to sticking to forms and formliners with Clean Strip J2. This agent prevents adhesion and extends the life of your forms saving you time and money on replacements. Plus it’s ready to use so your job just got a whole lot easier! Any spills or overspray can be cleaned up with water so cleanup is easy and necessary for optimal application. For concentrated versions or similar products, simply add the recommended amount of release agent to water and shake the mixture thoroughly before application.

Technical

Here are the technical details on the agent:

1. Chemical Composition: The proprietary blend of surfactants and emulsifiers in Clean Strip J2 will release from fiberglass, aluminum, plywood, steel and more. This is a general purpose mix for all construction materials.

2. pH Level: 7.0-9.0 so it will work on all forms and surfaces.

3. Viscosity: 100-200 cP for easy application and coverage of all surfaces.

4. Surface Tension: 30-40 dynes/cm to wet and penetrate the form surface so concrete doesn’t stick.

5. Flash Point: 200°F (93°C) so it’s safe to handle and store.

6. Freeze Point: Works in cold weather. Freeze point below 32°F (0°C) so you can use all year.

7. Shelf Life: Store in a well ventilated area and away from extreme temperatures. 2 years from date of manufacture.

Now that you know the technical details you can see why the Dayton Clean Strip J2 Concrete Form Release Agent is the answer. Whether you’re using wood, steel, plastic or any other material this agent will release clean and extend the life of your forms. It’s a must have for any contractor.

How to Use

Apply release agent evenly to the form surfaces before pouring concrete for a smooth release every time.

Uses

For all forms and formliners. Residential, commercial and industrial. Small jobs or large projects. Try the Dayton Clean Strip J2 Concrete Form Release Agent and see the difference today. Buy quality and save on maintenance and extend the life of your forms.