Concrete Reinforcing Chairs, 1-1/2in Mesh Up for #6 (150/Case)

Concrete Reinforcing Chairs, 1-1/2in Mesh Ups for #6 (150/Cs)

Features: 1-1/2” all plastic reinforcement wire chair for concrete slabs no tying required, for #6, 8, & 10 gauge wire. These wire mesh chairs are for reinforcement in all construction projects.

This chair will raise the wire mesh above the concrete slabs and return the mesh to its original position and maintain the structural integrity after being subjected to the loads commonly encountered while placing the wire and spreading the concrete.

This flexible plastic support solves the problems of concrete slabs by getting off the ground, supporting the mesh above the membrane before and during pour, snapping to the mesh easily, quickly attached and firmly, deflects and rebounds when the mesh approximately is pressed down, won’t enter the subsurface due to the large base ring, reduces manpower on the job by eliminating the “hook man” and designed for 3” to 5” slab.

The chairs will return the mesh to its original position after being subjected to various loads during the pouring process. Their elastic characteristics allow them to easily attach to the mesh and return to their original position, enhancing the overall effectiveness of installation.

Also, these supports will prevent wire bending by allowing the mesh to deflect under pressure and rebound, ensuring proper alignment and stability.

Reinforcing Products Introduction

In construction, reinforcing products are the key to the strength and longevity of concrete structures. These products, including concrete reinforcing chairs, are designed to support and stabilize wire mesh and rebar, preventing them from shifting during the concrete pour. By keeping the wire mesh elevated and in the correct position, these chairs will distribute the loads evenly, reducing the risk of structural failure. Whether you’re working on a small residential project or a large commercial development, the right reinforcing products can make all the difference in the quality and durability of your concrete work.

Continuous Mesh Chair Upper - Plain is a commercial grade product for all commercial concrete projects, with detailed specs and benefits. The mesh is placed in the forms during pour to support and elevate. This chair has metal bar supports to reinforce steel in various applications such as elevated decks, footings, slabs on metal deck and bridge decks, available in both standard and metric sizes. As a metal deck product it keeps the reinforcing steel in place and provides support and stability. Note: This product is also available in metric sizes. Whether you’re working on a large commercial project or a complex bridge deck, this continuous mesh chair meets the demands of today’s construction with its various sizes for different applications.

Key Features and Benefits

Continuous Mesh Chairs Upper - Plain has the following key features and benefits:

• Metal Bar Supports: Reinforces steel in various applications based upon loads commonly encountered

• Versatile: For elevated decks, footings, slabs on metal deck and bridge decks.

• Additional Support for Mesh Chairs: Supports reinforcing steel and metal deck.

• Compliance: Domestic and CRSI compliant.

• Length:100 linear feet with the mesh approximately

• Easy to Install: Easy to install and use, saves labor time and cost, and quickly attached

• Reduce Membrane Puncture: Prevents damage caused by sharp wire ends, improving the overall integrity of the installation.

• Reduce Supervision: The design requires minimal oversight and labor during installation, potentially lowering the need for a dedicated 'hook man'.

• Resist: The base ring helps the chair resist sinking into the subsurface, enhancing stability during the pouring process.

• Rotate: Designed to snap firmly into place at intersections, preventing the mesh from rotating or falling off during pouring.

Specs

Made from high quality flexible plastic they can withstand the stresses and loads of concrete pouring. They support wire mesh with #6, 8, and 10 gauge wire and are 1-1/2 inches high to support the wire mesh above the membrane. The large base ring helps to resist sinking into the subsurface. Pack of 150, these chairs have you covered for big projects and will keep your wire mesh in place throughout the construction process.

Applications

Continuous Mesh Chair Upper - Plain is for commercial concrete projects and can be used in:

• Elevated Decks: Reinforcing steel in elevated structures with flexible plastic support.

• Footings: Stability and strength in footings to support mesh.

• Slab on Metal Deck: Slabs on metal deck to keep in place.

• Bridge Decks: Bridge deck construction.

• Commercial Use: All commercial projects, 3” to 5” slabs. Discover the Benefits of Stayform Mesh for Your Construction Needs

• Load: Can withstand loads during pour and will return the steel to its original position.

• Compliance: Buy America and CRSI compliant.

• Stability: Mesh systems don’t rotate or fall off when installed.

• Protection: Prevents displacement and bending

• Intersections: Stability where wires intersect during pouring.

This covers the Continuous Mesh Chair Upper - Plain and its features, benefits and applications.

In summary, Concrete Reinforcing Chairs are a reliable and efficient way to support your construction projects. Their flexible plastic, easy to install and robust performance makes them a must have for both residential and commercial applications. As the construction industry evolves we can expect to see more innovations in reinforcing products that are more durable, easier to use and environmentally friendly. Stay informed and you’ll have access to the best tools and techniques for your construction needs and will pave the way for safer, stronger and more efficient building practices.