Yellow Cylinder: 4 x 8 Concrete Cylinder Test (Case of 96)
Paragon Products 1202-5016, 4x8 ConcreteTest Cylinder (96 per case, Yellow). For those looking for high-quality concrete testing materials, check out the ASTM 1231 4in Neoprene Concrete Cylinder Pad Caps, 70 Duro.
Our 4x8 Concrete Test Cylinders are yellow, single-piece, non-absorbent, injected plastic unit for a consistent shape and dimensional tolerance. They are durable and corrosion resistant with unlimited shelf life. See product page for this item.
Packed 96 per case. Includes domed plastic lid. Price per case available upon request.
Meets Standard Test Method for Fresh Concrete Tests, including Density Tests:
-
AASHTO M205
-
AASHTO T22
-
AASHTO T23
-
AASHTO T126
-
AASHTO T198
-
ASTM C31
-
ASTM C39
-
ASTM C192
-
ASTM C470
-
ASTM C496
Product Page
Our refrigerant recovery cylinders and machines are designed with safety and efficiency in mind, to fully comply with EPA and ASHRAE regulations for refrigerant recovery and recycling. Made from high quality materials like stainless steel and aluminum, these cylinders are durable and corrosion resistant for HVAC, automotive and industrial refrigeration applications.
Equipped with temperature control, pressure gauges and automatic shut-off, our refrigerant recovery machines are safe and efficient. We offer cylinders in 50 to 1000 pound sizes to fit various refrigerant quantities and equipment types for different applications.
Powered by electric motors or compressors, our machines operate in any environment. They are compatible with R-22, R-410A and R-134a refrigerants for technicians and professionals in the field.
We provide product page and manuals and training resources to support safe and effective use. Our refrigerant recovery cylinders and machines are warranted and backed by customer support, so you can have peace of mind and protection. We update and improve our products to comply with changing regulations and industry standards, like the EPA’s Clean Air Act and ASHRAE’s refrigerant safety guidelines.
4 x 8 Concrete Cylinder Test
These 4x8in Concrete Test Cylinders are made of durable, non-absorbent injected plastic for consistent shape and dimensional tolerance. Made from high quality materials like stainless steel and aluminum. Yellow for easy identification on site.
Climate Resistant: Indoor and outdoor use, will work in any weather.
Dimensions:4in diameter x 8in high (102 x 203mm) for plenty of room to test concrete strength and quality.
Case Configuration: 96 per case, each cylinder has domed plastic lid attached.
Certified Standards: Meets industry standards AASHTO and ASTM for accurate and consistent results in fresh concrete testing.
Applications and Uses:
For all concrete testing applications, these 4x8in cylinders are a must for testing concrete strength and quality of mixes used in construction projects across the USA. From small residential to large infrastructure projects. Perfect for acceptance testing right off the Ready Mixed Concrete Truck.
Related Products:
-
Tamping Rods: For consolidating fresh concrete in slump, air content and strength tests.
-
Strike-Off Bars: For removing excess material form concrete test specimens and smoothing curing concrete test specimens quickly.
-
Stripping Tools: Screw-driver style and T-handle for easy removal of cured concrete from cylinder molds.
-
Rubber Mallet: For easy removal of concrete from molds, minimal damage and accurate testing.
USA Application:
From coast to coast and from small to large projects, the USA construction industry is diverse. Concrete testing equipment like the Paragon 4x8 ConcreteTest Cylinder is critical. Meets industry standards and provides accurate performance data to ensure safety, longevity and structural integrity of concrete applications across the USA.
Conclusion:
Whether you’re doing routine quality control on residential foundations or overseeing large infrastructure projects, the Paragon Products 1202-5016, 4x8 Concrete Test Cylinder is the most reliable and accurate. We stand behind our quality and customer satisfaction. These cylinders are your go to for concrete testing and for capping cylindrical concrete specimens after initial curing, providing you with the information you need to optimize your construction practices and get better project results.
Concrete Cylinders
Concrete cylinders are a key tool in the construction and engineering industries for testing fresh concrete applications. They are used in HVAC, automotive and industrial refrigeration applications. Made from high quality materials like plastic, steel and cast iron they can withstand the test and are durable and weather resistant.
Available in 6x12, 4x8, 3x6 and 2x4 inches fresh concrete cylinders meet various testing requirements. Reusable they are a cost effective solution for frequent testing. Comes with tamping rods, stripping tools and carriers for efficient and accurate testing.
Meets industry standards such as ASTM C470, C31, C192 and AASHTO M 205, R 39 and T 23. Available in single use plastic, reusable plastic, steel and cast iron. Versatile for small residential to large infrastructure projects.
Concrete Test Cylinders Uses and Handling
Concrete test cylinders are used for compression testing to determine the compressive strength of concrete and to help in verifying mixture proportions. These cylinders are equipped with temperature control, pressure gauges and automatic shut-off features. Used in construction, water storage tanks, engineering and research, compressive strength is essential for quality and safety of concrete structures.
Proper handling and care are required to get accurate and reliable testing results with field cured cylinders or standard cured cylinders. Concrete test cylinders should be stored in a dry and secure location away from direct sunlight and extreme temperatures. Handle with care to avoid damage and report any damage immediately to maintain the integrity of the tests.
Cleaning and maintenance of concrete test cylinders is crucial for optimal performance of the composite sample after standard curing concrete test specimens. These cylinders represent the compressive strength of concrete in various applications like building construction, bridge construction and infrastructure development. They are used to determine the compressive strength of concrete at different ages from initial curing to final curing stages.
Meets industry standards and regulations. That’s why concrete test cylinders are a must. Provides performance data to optimize your construction practices and get better project results.
Features and Specifications
-
Concrete Test Cylinders: Constructed with durable materials, available in various sizes, equipped with domed plastic lid and meets industry standards.
-
Tamping Rods: For consolidating fresh concrete in slump, air content and strength tests.
-
Strike-Off Bars: For removing excess material form concrete test specimens and smoothing curing concrete test specimens quickly.
-
Stripping Tools: Screw-driver style and T-handle for easy removal of cured concrete from cylinder molds. For more advanced options, check out the Concrete Cylinder Stripping Tool, Quick-Strip, 4in.
-
Rubber Mallet: For easy removal of concrete from molds, minimal damage and accurate testing.
-
Refrigerant Compatibility: Works with R-22, R-410A and R-134a refrigerants.
-
Motor Type: Electric or compressor motor.
-
Cylinder Size: 50 to 1000 pounds.
-
Operating Pressure: Up to 350 psi.
-
Temperature Range: -40°F to 150°F.
-
Certifications: EPA and ASHRAE compliant and other international standards.
-
Warranty: Full warranty and dedicated customer support.
-
Training and Resources: Product manual, training video and customer support.
