Heavy Duty Steel Column Form for Concrete Forming, 24in Dia X 2ft
Deslauriers Heavy Duty Steel Column forms develop an exceptionally smooth, hard surface remarkably free of voids and with a minimum number of indistinct seams. The forms are galvanized constant radius steel half round sections and quarter round sections (for forms over 48" in diameter) bolted into units for crane handling on the jobsite.
Vertical and horizontal seams, opened and closed with each pour, are connected with high speed bolts to speed setting and stripping.
In addition to the standard column diameters shown, custom diameters and lengths are also available.
Lateral pressure should not exceed 3000 PSF on forms through 36" diameter or 2000 PSF on forms over 36" diameter.
Built-in 1-1/2" lifting holes on most 4ft and 8ft forms. Lifting design of 4000 pound per hole or 8000 pounds assembled. Deslauriers recommends using lifting spreader bar for lifting all column forms.
The Heavy Duty Steel Column Form for Concrete Forming is the ultimate solution for constructing strong and durable columns. Designed by Deslauriers, these forms are built to deliver exceptional results with an impeccable finish. You can trust these forms to create a smooth and hard surface, completely free of voids and indistinct seams.
Made from galvanized steel, the forms consist of constant radius steel half round sections, ensuring stability and strength. For larger forms with a diameter of over 48 inches, quarter round sections are also included. These sections are bolted together, making it easy to handle and transport them on the jobsite with the help of a crane.
The vertical and horizontal seams of the forms are connected using high-speed bolts that allow for quick setting and stripping. This helps expedite the construction process, saving valuable time and effort. Additionally, Deslauriers offers custom diameters and lengths of these forms, allowing you to tailor them to fit your specific project requirements.
When using these column forms, it is important to consider the lateral pressure they can handle. For forms up to 36 inches in diameter, the maximum lateral pressure should not exceed 3000 pounds per square foot (PSF). For forms larger than 36 inches in diameter, the maximum lateral pressure should be limited to 2000 PSF.
Convenience is a key feature of these column forms. Most 4ft and 8ft forms come with built-in 1-1/2" lifting holes, making them easy to lift and maneuver. These forms have been tested and designed to withstand a maximum lifting load of 4000 pounds per hole or 8000 pounds when fully assembled. Deslauriers highly recommends using a lifting spreader bar for lifting all column forms.
For more information and guidance on using these column forms, you can refer to the Deslauriers Forming Manual, available in PDF format. Deslauriers also offers a range of other concrete forming accessories and tremie pipes and products. Explore their full line of products to find everything you need for your concrete construction projects.
