Lignomat RH-KS, Ligno-Tec RH Concrete Moisture Meter Kit follows ASTM F2170
The Ligno-Tec RH concrete moisture meter for contractors, floor covering installers and restoration specialists is easy to use and affordable. The meter can be used as a Thermo-Hygrometer or for in-depth moisture testing of concrete following ASTM F2170-11 RH in-situ probe test. Moisture meter indicates relative humidity, temperature, GPP and DPT.
Thermo-Hygrometer: If you are looking for an accurate Hygrometer, the Ligno-Tec RH concrete moisture meter with RH BluePeg probe should be your choice. The RH BluePeg probe uses a hi-accuracy sensor with a short acclimation time. The RH BluePeg probe can be connected with a small Adapter directly to the meter. For extended reach, a cable up to 50ft long can be added. All cables have easy-to-connect and fail-proof 35mm stereo connectors.
In-situ probe concrete testing: Lignomat has designed the RH BluePeg Probe, sleeves, cable and RH concrete moisture meter for a simple and fail-proof measuring procedure.
The RH BluePeg probe drops easily into the sleeve. The cap fits perfectly and is as flat as can be. The 3.5mm stereo connector can be easily connected. No pin alignment of the cable needs to be fitted. Plug in and read, that’s what our customers like. All Lignomat RH equipment complies to the latest ASTM F2170 standard for RH in-situ probe method.
Standard RH Testing Package RH-KS:
1 LignoTec RH meter,
1 RH BluePeg Probe, 1 RH Adapter,
1 RH Cable, 10 Sleeves with caps, 1 brush, 1 vacuum attachment 1 Case S
RH Measurements ±2% for 10-90%+ ±3% for 0-10% and > 90%
Temperature Measurements ±0.5°F for 32°F to 120°F+ ±1°F less 32°F to 5°F+ ±1°F above 120°F to 160°F
Display 0.1% resolution for the entire range
Calibration All RH BluePegs are NIST certified
Standard Sleeve Following ASTM-F2170 for a 4 inch slab we offer sleeves and caps at 1.8 inches. If longer sleeves are desired we also offer 3.0″ sleeves that can be shortened to desired lengths
Calibration Check During the first year, Lignomat will test the calibration of the RH BluePeg probes three times without a charge. To check the calibration we offer calibration check salts. T-75 and T-75/33
Included Ligno-DuoTec BW, RH BluePeg sensor, 10 1.8 inch sleeves and caps, RH adapter for ambient conditions, RH cable with seal plug and small hard-shell carrying case
Size 12″ X 8″ X 3.5″
Weight 3 lbs
Warranty All moisture meters have a 2 year warranty. RH sensor has a 1 year warranty and battery are excluded
