Lignomat K-2M, Lignometer K, Electrode E-12, Cable, Case

Lignomat K-2M, Lignometer K, Electrode E-12, Cable, Case

Advanced moisture meter Lignometer K

Package K-2M consists of: 
1 Lignometer K moisture meter,
1 Electrode E12, 1 pair pins each DZ 1″ and DA 1.5″, 1 BNC Cable, 1 Case M

The Lignometer K is an advanced moisture meter that incorporates all the great measuring technology for pin meters that Lignomat offers. With the widest measuring range this meter has been used for wood and many non-wood applications. Reliability, calibration accuracy and ease-of-operation are the outstanding features of this meter with over 125 Individual Wood Species Corrections and a wide measuring range. Built sturdy to withstand harsh mill environments.

The wide measuring range allows measuring lumber when it first arrives at the mill, during the kiln drying process, until the final check when the finished product is shipped off to the customer. If the lumber is hot or cold built-in corrections will compensate  for different wood temperatures. Ideal for in-kiln readings with PK Probes and Cables.

A meter you can trust.

Applications

Measuring moisture throughout all manufacturing steps from green lumber to the ready-to-ship product. For wood floors and for restoration applications, where accuracy counts. Wide measuring range makes meter suited for non-wood applications.

Advantages

Measuring moisture throughout all manufacturing steps from green lumber to the ready-to-ship product. Checking wood floors and for restoration applications. Using Electrode E12allows accurate surface and core measurements with insulated pins up to 2″ deep. Industry standard for quality control of wood.

The wide measuring range is also needed for construction, inspection and restoration applications for evaluating water damaged materials.The meter indicates small changes in moisture content over its entire measuring range up to 7″ deep. That makes it easy to accurately pin point questionable areas, where too much moisture has been absorbed.

Moisture Meter: Lignometer K – pin meter

— Microprocessor-based circuitry assures calibration
— stability and accuracy for the life-time of the meter.
— Calibration is internally checked and adjusted before
— each reading.
— Measuring range is low enough to check hardwood floors,
— musical instruments, furniture grade lumber (5%).
— Measuring range is high enough to evaluate green lumber (99%).
— 150 Individual correction settings for domestic and tropical wood species,
—  bamboo and drywall.
— Resolution for entire range 0.1%.
— Reference scale is available for concrete and other materials (0-99).
— Connector for external cable built-in

Accessories of Package K-2M

Electrode E12 is equipped with a slide hammer to insert and extract the teflon-coated pins. A BNC connector is mounted at the electrode head to connect the cable.
The cable is detachable and included in the package. Electrode E12 plus 1 pair DZ pins and 1 pair DA pins.
Weight 8 oz (260g). Length without pins 6″ (15cm)

BNC Cable connects Electrode E12 to
–Lignometer K
–Ligno-VersaTec
BNC cable, standard length 3ft (0.9m)

Case
The black hard-shell case comes with a handle and a foam insert for protection. Designed to fit any mini-Ligno with Electrode E12.
Size: 13.5″ x 8″ x 3.5″ (35 x 20.3 x 9cm)

Measuring Range        5-99% dependent upon species setting*

Resolution       0.1% for entire measuring range

Species Corrections    over 125 individualized settings for wood species corrections

Temperature Corrections        00F to 210 0F

Gypsum (sheetrock) Scale      -150C to 95 0C

Reference Scale           0-99 for non-wood building materials

Calibration Check        The calibration is internally checked and automatically adjusted if necessary

Battery one 9V battery

Size      2.5″x 4.75″x1″ (60x120x25mm)

Weight 8 ounces (200g), made out of high-impact plastic

Electrodes       Electrode or PK Probe required >> click here for a choice of attachments