F.A.P. Plus 1/4-inch OD Polyethylene Tubing (50ft)

TR-735 DGSI F.A.P. Plus 1/4-inch OD Polyethylene Tubing 50ft | DGSI Slope Indicator Environmental Products

Polyethylene Tubing downwell supply to pump

• Hoses and Tubing (TR-732 / 734 / 735) for the F.A.P. Plus are available in various sizes and sold per foot (50ft base length).
• The standard hose size from the outlet side of the filter regulator to the F.A.P. Plus™ pump is a 1⁄4” Push-Lok™ fitting and a 3/8 in barb fitting on the air inlet side.
• The standard F.A.P. Plus™ fluid discharge line has a 3/8 in barb fitting.
• The hose sizes may have to be increased depending on the distance between the system components.

Part | Size | Composite | Use

• TR-732 | 1/2in ID | Buna-N Optional above-ground air supply
• TR-734 | 3/8in ID | Buna-N Above-ground fluid discharge or air supply, or downwell fluid discharge
• TR-735 | 1/4in OD | Polyethylene Downwell supply to pump

F.A.P. Plus™ Pump System

The F.A.P. Plus™ Pump system is comprised of seven main components:

• F.A.P. Plus™ Pump (1*)
• Skimmer Assembly (2*)
• Well Clincher (3*)
• Filter/Regulator (5*)
• Pneumatic Overfill Protection Device (4*) 
• Electric Air Compressor (not shown*)
• Hoses (not shown*)

* refer to product photo for reference

Options:

• Solar NAPL Compressor
• F.A.P. HF 

Downloads

• F.A.P. Plus™ Pump System product sheet (PDF)
• F.A.P. Plus™ ZW pump product sheet (PDF)
• Hose Selection Table (PDF)
• Air Flow and Press Loss Table (PDF)
• Water Flow and Pressure Loss Table (PDF)
• Field Installation (PDF)