Dayton T29 Shear Connector, Base Anchor, W/ Two 5in Bearcat Bolts

FEATURES

• Patent-pending system developed by Dayton Superior's Tilt-Up experts to meet vertical integrity requirements for a nominal tensile strength of 10,000 lbs. Refer to ACI 318-19 section 16.2.4.3(b)
• Provides both in-plane and out-of-plane shear resistance
• Not dependent on top of footing elevation relative to top of slab elevation
• Tilt-Up Shear Connector Kit
• May eliminate the need for additional epoxy, grouted or welded structural connections
• Requires a single anchor connection to the footing. Simply anchor to the footing with a galvanized threaded rod epoxy anchor, or galvanized threaded screw-in anchor
• No panel patching is required after installation ‚ñ† Low-profile design provides a discrete
• connection once grouted and backfilled
• No welding required provides savings on additional trade expenses
• Does not compromise rated anchor strength caused by angled install - our 90° angled design was developed to drill straight into concrete to simplify calculations for your project requirement needs
• One size applicable for all solid panel thicknesses down to 5-1/2"
• The panel anchor's plastic face plate functions as a slab saver, eliminating the need for a separate saver.
• Accommodates horizontal movement of panel due to temperature and shrinkage
• Offered with a hot dipped galvanized finish
• May eliminate requirement for Slab On Grade
• leave-out strips, if project loading permits.
• Readily verifiable installations
• Applications in cracked concrete are acceptable when utilizing the 12" Bearcat BoltTM for connection. Please Contact Dayton Superior for additional information.
• Connection is discreetly installed on exterior face of panel/structure

TECHNICAL DATA SHEETS

• T29 Superior Panel Base Anchor (PBA 10K) & Shear Connector (US) Tech Data Sheet