Dayton Superior 101358, T29 Shear Connector For The Superior Panel Base Anchor (PBA 10K), Shear Connector
The Dayton Superior Panel Base Anchor is a quick, discrete and durable system engineered for a permanent connection of concrete panels to footings.
APPLICATION
The Panel Base Anchor and optional shear connector can be used in solid panels, insulated sandwich panels and insulated composite panels. They can also be applied to anchor site cast tilt-up panels or plant casted precast panels.
FEATURES
Patent-pending system developed by Dayton Superior's Tilt-Up experts to meet vertical integrity requirements for a nominal tensile strength of 10,000 lbs. Refer to ACI 318-19 section 16.2.4.3(b)
Provides both in-plane and out-of-plane shear resistance
Not dependent on top of footing elevation relative to top of slab elevation
Tilt-Up Shear Connector Kit
May eliminate the need for additional epoxy, grouted or welded structural connections
Requires a single anchor connection to the footing. Simply anchor to the footing with a galvanized threaded rod epoxy anchor, or galvanized threaded screw-in anchor
No panel patching is required after installation ■ Low-profile design provides a discrete
connection once grouted and backfilled
No welding required provides savings on additional trade expenses
Does not compromise rated anchor strength caused by angled install - our 90° angled design was developed to drill straight into concrete to simplify calculations for your project requirement needs
One size applicable for all solid panel thicknesses down to 5-1/2"
The panel anchor's plastic face plate functions as a slab saver, eliminating the need for a separate saver.
Accommodates horizontal movement of panel due to temperature and shrinkage
Offered with a hot dipped galvanized finish
May eliminate requirement for Slab On Grade
leave-out strips, if project loading permits.
Readily verifiable installations
Applications in cracked concrete are acceptable when utilizing the 12" Bearcat BoltTM for connection. Please Contact Dayton Superior for additional information.
Connection is discreetly installed on exterior face of panel/structure