Dayton Profill AW Joint Filler, 257 ml Cartridge (12/Case)

ProFill AW is a two-component polyurea joint filler designed for heavy duty traffic and freezer applications. ProFill AW is solvent free, flexible and with its low viscosity and self-leveling design, allows for 10%-15% movement of installed joint width. It may be used in temperatures between -40°F to 120°F (-40°C to 49°C). ProFill AW is moisture sensitive and cannot be used in damp conditions.

USE

ProFill AW is used to fill tooled interior/exterior control joints or new construction saw joints on horizontal concrete surfaces. May be used for exterior applications when minimal joint movement from thermal cycling will occur and protects joint edges from spalling due to wheeled traffic.

FEATURES

• Self-leveling, low viscosity system
  
• Wide application and service temperature range, including freezer applications
• Installation between -40°F to 120°F (-40°C to 49°C)
• ProFill AW can be shaved or sanded within a minimum of 60 minutes at 75°F (24°C)
• Profill AW can be opened to foot and light vehicular traffic in 90 minutes at 75 °F (24 °C)
• 1:1 mix ratio
• Highly sensitive to moisture
• Allows 10%-15% joint movement
• Does not weld slab joints together
• Meets U.S.D.A. requirements for incidental food contact