Dayton Proanchor Weathermax Anchoring Epoxy, 9.5oz (12/Case)

ProAnchor WeatherMax is a two component high strength, styrene-free, vinylester adhesive anchoring adhesive used for anchoring threaded rod and reinforcing bar in cracked and uncracked concrete in accordance with ACI 355.4 and ICC-ES ESR-4554.

USE

ProAnchor WeatherMax is for use in cracked and uncracked normal weight and lightweight concrete anchoring dowels, bolts, threaded rod, pins and reinforcement steel in concrete. Install anchors in a vertical down, horizontal, upwardly inclined and overhead installations.

Resists static, wind and earthquake loading in tension and shear (IBC Seismic Design Categories A through F). ProAnchor WeatherMax can also be used in cooler and freezer applications or anywhere low temperature installations are required.

FEATURES

• Full cure in 45 minutes at 70 °F (21 °C).
• Ideal for cold weather installations
• Suitable for dry, water saturated and water-filled holes
• High structural strength adhesive

• Resists sustained loads up to 161 °F (72

• °C).temperatures
• Styrene free
• Non-sag gel consistency for horizontal and vertical installations
• Two component (10:1 mix ratio by volume)