6in Unbonded Capping Neoprene Pad Cap, 60 Duro (2/Pk)

Deslauriers 6in Unbonded Capping Neoprene Pad Cap, 60 Duro (2/Pk)

The Neoprene Compression Pad flows into irregularities and distributes the test load uniformly without creating air pockets to assure consistent breaks.  Patented “stay in place” nubs, secure pads into cups.

Compression pads are available in several hardnesses.
50 duro for design strength 1500 to 6000 psi.
60 duro for design strength 2500 to 7000 psi.
70 duro for design strength 4000 to 12,000 psi.

Qualifying tests must be performed for strength over 7,000 psi per ASTM.

Refer to ASTM C1231 for max uses, qualification test, etc. Our sales personnel are always available to assist.

6in (152.4mm) Neoprene Pads come in 50, 60, or 70 durometer. They are used when testing compressive strength of 6x12in concrete cylinders and meet ASTM C1231/1231M and AASHTO T 22 standards. The pads are 0.5in (12.7mm) thick and flow during compression to fill irregularities in cylinder ends and ensure uniform load distribution. The 6in Steel Retainer Set are sold separately and required to hold the pads at both ends of the cylinder. Two pads are required. Pads can be used up to 100 times.

Deslauriers 6in Unbonded Capping Neoprene Pad Caps Meets Test Methods:

• AASHTO T22
• ASTM C 1231

 Econ-O-Cap Unbonded Capping System

 

The Deslauriers 6in Unbonded Capping Neoprene Pad Cap, 60 Duro (2/PK) is a high-quality product designed to ensure consistent breaks and accurate testing of compressive strength for 6x12 inch concrete cylinders.

Featuring a neoprene compression pad, this product is able to flow into irregularities and distribute the test load uniformly, without creating air pockets. This ensures that each break is consistent and reliable. The pads are made with a patented "stay in place" design, with nubs that secure them into the cups, preventing any movement during testing.

The 6in Neoprene Pads come in three different hardnesses: 50 duro for design strength 1500 to 6000 psi, 60 duro for design strength 2500 to 7000 psi, and 70 duro for design strength 4000 to 12,000 psi. Please note that qualifying tests must be performed for strengths over 7,000 psi per ASTM regulations. Our sales personnel are always available to assist with any questions or concerns.

These pads are 0.5in thick and are able to flow during compression to fill any irregularities in the cylinder ends. This ensures that the load is distributed uniformly across the entire surface, resulting in accurate test results. The pads meet ASTM C1231/1231M and AASHTO T 22 standards, ensuring their reliability and adherence to industry regulations.

In order to use the pads, the 6in Steel Retainer Set is required. These retainers hold the pads securely at both ends of the cylinder and are sold separately. Each pack of pads includes two pads, and they can be used up to 100 times, making them a cost-effective choice for testing purposes.

The Deslauriers 6in Unbonded Capping Neoprene Pad Cap meets the test methods AASHTO T22 and ASTM C1231. These test methods have specific requirements for the capping of concrete cylinders, and our product has been designed to meet and exceed these requirements.

For more information on our complete line of concrete capping and unbonded cylinder capping products, please visit our website. We also have related blog posts available that provide essential steps and information for capping concrete cylinders. Check them out for a hassle-free guide and to understand the benefits of capping compound for concrete cylinder testing.

Choose the Deslauriers 6in Unbonded Capping Neoprene Pad Cap for reliable and accurate testing of concrete cylinder compressive strength.