50 lb. Bag of Self Leveling Concrete, Level-Topping Exterior

50 lb. Bag of Self Leveling Concrete: Level-Topping Exterior Topping

Level Topping Exterior is a cement based, nonshrink, self-leveling topping for leveling horizontal concrete. Just add water and pour self leveling concrete or pump onto the floor joists. When you pour self leveling concrete it fixes uneven surfaces and imperfections. Level Topping is not a gypsum based product.

USE

Level Topping Exterior can be used to resurface sound, properly prepared concrete. Use on new construction to correct rough or unfinished concrete and to level uneven concrete slabs. On restoration projects use Level Topping Exterior to get a hard even finish over old concrete. Typical applications are walkways, balconies, patios, driveways, garage floors, loading docks and parking decks. Level Topping Exterior is for foot and rubber wheeled traffic for interior or exterior use. Walkable in 4 hours; Drive on it in 24 hours; flowable and pumpable for more productivity. Level Topping Exterior can be applied 1/4” to 1” (0.6 to 2.5 cm) neat and up to 3” (7.6 cm) extended with clean 3/8” (0.10 cm) pea gravel.

FEATURES

• Topping for interior and exterior use ‚ñ† Portland cement-based

• Walkable in 4 hours

• Drive on it in 24 hours

• Pourable/pumpable

• Good bonding

• Non-shrink

• High compressive strength

Product Overview

The SwiftSet Self-Leveler is a fast-setting, self-leveling underlayment or base coat mix for creating smooth, flat and level surfaces for various resilient flooring types. This product is for interior concrete and cementitious substrates, for use under floor coverings such as ceramic tile, engineered wood and carpet. With high strength and long flow life, the SwiftSet Self-Leveler is for new floor projects and repair projects. Whether new construction or restoration, this self leveler will give you a smooth, flat surface ready for any floor coverings and finish.

What is Self Leveling Concrete?

Self leveling concrete is a concrete overlay to resurface, smooth and level old concrete surface. Resurfacing exterior concrete areas with self-leveling overlays levels and smooths the surface and enhances the appearance and look of outdoor concrete areas. This flowable, self leveling compound is for exterior concrete areas such as driveways, walkways, patios and other outdoor spaces. Easy to apply and durable it’s a popular choice to resurface and level uneven concrete surfaces. Whether new construction or restoration of old concrete, self leveling concrete is the solution for a smooth finish. When applied correctly self leveling concrete will cover flat surfaces and give you a smooth finish.

Technical Specifications

• Product: Fast setting, self-leveling underlayment or base coat mix

• Package: 50 lb bag

• Setting Time: 2-4 hours

• Walkable Time: 4-6 hours

• Depth: Can be applied up to 1 inch (2.5 cm) in a single lift

• Coverage: 20-25 sq ft per 50 lb bag

• Substrate: Concrete substrates, interior concrete and cementitious substrates

• Bonding Agent: Stone Edge Surfaces Primer 100 for physical & chemical bond

• Aggregate: Allows for deeper fill by adding aggregate

• Indoor/Outdoor Use: For both indoor and outdoor use

• Fire Rating: ASTM E84 fire rated

• Compressive Strength: Dries to over 7,000 psi

The SwiftSet Self-Leveler is designed to give you a durable, high-strength surface that can handle residential and commercial environments. Fast setting and compatible with various floor coverings it’s the perfect solution for any project that requires a smooth, level surface.

Self Leveling Concrete that can withstand Light Vehicular Traffic

Self leveling concrete has many benefits that makes it a popular choice for both residential and commercial applications. One of its biggest benefit is easy application, quick and easy to resurface existing concrete. It can also create a decorative concrete finished wear surface through techniques such as pigmented color dyes, stains and mechanical polishing. It’s durable enough to withstand light vehicular traffic, perfect for garage floor coverings and other exterior concrete areas and gives you flat surfaces for various floor finishes. Self leveling concrete is also versatile in design, can create a flat surface to accommodate various floor finishes such as ceramic tile, natural stone, hardwood resilient flooring, VCT, linoleum and concrete overlays. It’s a great option to level uneven floor coverings and a solid base for finished floor installations.

Before applying exterior self-leveling concrete overlays the concrete surface must be clean, dry and free of any debris, oils or other substances that may interfere with the bonding. Proper surface preparation is key to getting flat surfaces and for self-leveling concrete to adhere well and give you a smooth finish. Here’s what to do:

1. Clean the Surface: Use a pressure washer or a broom to remove any dirt, dust or debris from the concrete. A clean surface is better for adhesion of the self-leveling compound.

2. Fill Cracks: Fill any cracks or holes with patching compound and let it dry. This is important to have a smooth and even base for the overlay.

3. Remove Old Coatings: If the surface has an existing coating such as paint or sealant remove it using a suitable solvent or stripper. This will allow the new overlay to bond better to the old concrete.

4. Etch the Surface: Use a concrete etcher to roughen the surface. This will give better bond between old concrete and new overlay for a durable finish.

5. Prime: Finally apply a primer specifically for exterior self-leveling concrete overlays. This is the final step to create a strong bond between old concrete and new overlay.

By following these steps you can ensure your surface is ready for self-leveling concrete and will have a smooth finish.

How to Apply Self Leveling Concrete for Resurfacing Exterior Concrete Areas

Applying self leveling concrete is a 2 step process: surface preparation and overlay application. Epoxy coatings can be used as a protective solution to resist wear, chemicals and UV exposure. Surface preparation is key and includes drying of any applied filler and sealer, priming the concrete surface and filling in any existing cracks. To avoid common mistakes use the right tools such as trowels or squeegees, mixing paddles or drills with mixing attachments, buckets, measuring tools, levels or straight edges, brooms or brushes and safety gear. Once the surface is prepared the self leveling concrete can be mixed and applied according to the manufacturer’s instructions and you’ll have a smooth finish. Make sure to apply correctly to get flat surfaces which is important for a professional look.

Mixing and applying exterior self-leveling concrete overlays requires attention to details to get it right. Here’s what to do:

1. Follow the Manufacturer’s Instructions: Always read and follow the manufacturer’s instructions for mixing and applying the overlay. This will ensure you use the right water to powder ratio and get the right consistency.

2. Mix the Overlay Correctly: Use the right water to powder ratio as specified by the manufacturer. Mix well to avoid lumps and get a smooth flowable consistency.

3. Apply: Pour the mixed overlay onto the prepared surface and spread it with a trowel or squeegee. Work in small sections to maintain even coverage and don’t let the overlay set too fast.

4. Use a Leveling Tool: To get even application and correct thickness use a leveling tool like laser level or spirit level. This will get you flat surfaces ready for any floor finish.

5. Finish the Surface: Once applied use a trowel or broom to finish the surface, get a smooth and even texture. This is important to get a professional look.

By following these mixing and application techniques you’ll get a smooth and durable self-leveling concrete surface ready for any floor finish.

Maintaining and caring for self leveling concrete is important to keep it looking and working good. Clean regularly to prevent staining and damage, use pH neutral cleaners and sweep and mop with household detergents or soaps and then rinse thoroughly. To protect the concrete from spills and weathering apply a sealer. Epoxy primer can also prevent staining. Regular inspection and immediate repair is important to address any wear and damage to extend the life and durability of the self leveling concrete surface. Epoxy coatings can also resist wear, chemicals and UV exposure, so it’s a good protective solution.

Despite planning and execution everything can go wrong during exterior self-leveling concrete overlays. Here are some common problems and solutions:

1. Inadequate Bonding: If the overlay is not bonding to the old concrete check the surface preparation. Make sure the surface was clean, dry and primed correctly before applying the overlay.

2. Uneven Surface: If the surface is uneven check the leveling tool and make sure it’s calibrated correctly. Also make sure you’re working in small sections to maintain even coverage and get flat surfaces.

3. Cracking: If the overlay is cracking check the thickness of the application. Make sure it’s within the manufacturer’s recommended range. Applying too thin or too thick can cause cracking.

4. Discoloration: If the overlay is discolored check the mixing ratio. Make sure you’re using the right water to powder ratio and mixing well to get a consistent color.

5. Delamination: If the overlay is delaminating check the surface preparation and make sure the primer was applied correctly. Surface preparation is key to prevent delamination.

By following these and common problems you’ll get a successful exterior self-leveling concrete overlay and a long lasting finish.

COMPETITOR PRODUCTS: SELF LEVELING CONCRETE

K 301 SD-T Mapecem 102