The HANNA INSTRUMENTS HI97710 PH, Free and Total Chlorine Photometer is the perfect tool for those who require accurate water quality testing results without sacrificing ease of use. The photometer boasts an advanced optical system which offers accuracy that matches that of lab-quality equipment. Its user-friendly design is tailored to meet the needs of all users, allowing for seamless operation. Whether you are a beginner or an expert in water quality testing, the HI97710 photometer will make your work easier, more efficient, and more precise.
The photometer is capable of measuring pH in the range of 6.5 to 8.5 pH and free and total chlorine in water samples from 0.00 to 5.00 mg/L (ppm). Notably, no warm-up time is required before taking measurements. For those who are new to water quality testing, the photometer comes with a tutorial mode with easy step-by-step instructions to ensure you get accurate readings every time. The HI97710 photometer uses powder or cost-saving liquid reagents to make your work easier and more efficient.
The HI97710 photometer is manufactured to the highest standards, bringing peace of mind to those who need accurate results every time. Its specifications include chlorine, free & total range at 0.00 to 5.00 mg/L; resolution at 0.01 mg/L, and accuracy at ±0.03 mg/L ±3% of reading at 25 °C, among others. The photometer uses an adaptation of the EPA DPD method 330.5 for chlorine, free and total measurements, while the Phenol Red method is used to measure pH. The HI97710 photometer also comes equipped with a light-emitting diode light source and a silicon photocell light detector with an 8nm bandwidth.
Measuring just 142.5 x 102.5 x 50.5 mm (5.6 x 4.0 x 2.0") and weighing only 380 g (13.4 oz.), the HI97710 photometer is portable and easy to carry from one testing location to another. Its alkaline 1.5V AA (3pcs.) power supply offers 800 measurements before needing a recharge. The photometer auto-off feature ensures the batteries last longer by switching off after 15 minutes of inactivity (30 minutes before a READ measurement). The HI97710 photometer is also temperature and humidity-resistant, with an operating range of 0 to 50 °C (32 to 122 °F) and 0 to 100% RH.
With a 2-year warranty, the HANNA INSTRUMENTS HI97710 PH, Free and Total Chlorine Photometer is built to last. Whether you are testing swimming pool water, drinking water, wastewater, or other fluids, this photometer will give you the accuracy and ease of use you need to ensure you get the results you need every time. Note that products classified as dangerous goods can only be shipped ground.
The photometer is capable of measuring pH in the range of 6.5 to 8.5 pH and free and total chlorine in water samples from 0.00 to 5.00 mg/L (ppm). Notably, no warm-up time is required before taking measurements. For those who are new to water quality testing, the photometer comes with a tutorial mode with easy step-by-step instructions to ensure you get accurate readings every time. The HI97710 photometer uses powder or cost-saving liquid reagents to make your work easier and more efficient.
The HI97710 photometer is manufactured to the highest standards, bringing peace of mind to those who need accurate results every time. Its specifications include chlorine, free & total range at 0.00 to 5.00 mg/L; resolution at 0.01 mg/L, and accuracy at ±0.03 mg/L ±3% of reading at 25 °C, among others. The photometer uses an adaptation of the EPA DPD method 330.5 for chlorine, free and total measurements, while the Phenol Red method is used to measure pH. The HI97710 photometer also comes equipped with a light-emitting diode light source and a silicon photocell light detector with an 8nm bandwidth.
Measuring just 142.5 x 102.5 x 50.5 mm (5.6 x 4.0 x 2.0") and weighing only 380 g (13.4 oz.), the HI97710 photometer is portable and easy to carry from one testing location to another. Its alkaline 1.5V AA (3pcs.) power supply offers 800 measurements before needing a recharge. The photometer auto-off feature ensures the batteries last longer by switching off after 15 minutes of inactivity (30 minutes before a READ measurement). The HI97710 photometer is also temperature and humidity-resistant, with an operating range of 0 to 50 °C (32 to 122 °F) and 0 to 100% RH.
With a 2-year warranty, the HANNA INSTRUMENTS HI97710 PH, Free and Total Chlorine Photometer is built to last. Whether you are testing swimming pool water, drinking water, wastewater, or other fluids, this photometer will give you the accuracy and ease of use you need to ensure you get the results you need every time. Note that products classified as dangerous goods can only be shipped ground.