Deslauriers 4in Unbonded Capping Neoprene Pad Cap, 60 Duro (20/Box)
The Neoprene Compression Pad flows into irregularities and distributes the test load uniformly without creating air pockets to assure consistent breaks. Patented “stay in place” nubs, secure pads into cups.
Compression pads are available in several hardnesses.
50 duro for design strength 1500 to 6000 psi.
60 duro for design strength 2500 to 7000 psi.
70 duro for design strength 4000 to 12,000 psi*.
*Qualifying tests must be performed for strength over 7,000 psi per ASTM.
Refer to ASTM C1231 for max uses, qualification test, etc. Our sales personnel are always available to assist.
4in Neoprene Pads come in 50, 60, or 70 durometer. They are used when testing compressive strength of concrete cylinders and meet ASTM C1231/1231M and AASHTO T 22 standards. The pads are 0.5in (12.7mm) thick and flow during compression to fill irregularities in cylinder ends and ensure uniform load distribution. The 4in Steel Retainer Set are sold separately and required to hold the pads at both ends of the cylinder. Two pads are required. Pads can be used up to 100 times.
Deslauriers 4in Unbonded Capping Neoprene Pad Caps Meets Test Methods:
- AASHTO T22
- ASTM C 1231
View the full line of Concrete Capping and Unbonded Cylinder Capping
The Deslauriers 4in Unbonded Capping Neoprene Pad Cap, 60 Duro (20/Box) is a high-quality product designed for capping concrete cylinders. These neoprene pads are essential for testing the compressive strength of concrete and ensure consistent breaks.
What sets these neoprene pads apart is their ability to flow into irregularities on the cylinder ends and distribute the test load uniformly. This prevents the creation of air pockets, resulting in accurate and reliable test results. The pads feature patented "stay in place" nubs that securely hold the pads into cups, ensuring they stay in position during testing.
Available in different hardnesses, the 60 duro pads are specifically designed for design strengths ranging from 2500 to 7000 psi. It is important to note that qualifying tests must be performed for strengths over 7000 psi, as per ASTM standards. Our sales personnel are always available to assist with any questions or concerns regarding the strength requirements and qualification tests.
The 4in Neoprene Pads are 0.5in thick and come in 50, 60, or 70 durometer options. These pads meet ASTM C1231/1231M and AASHTO T 22 standards for concrete cylinder testing. They are designed to flow during compression and fill any irregularities on the cylinder ends, ensuring uniform load distribution.
To hold the neoprene pads at both ends of the cylinder, the 4in Steel Retainer Set (sold separately) is required. Two pads are needed for each cylinder. The pads can be reused up to 100 times, making them a cost-effective choice for long-term use.
The Deslauriers 4in Unbonded Capping Neoprene Pad Caps meet AASHTO T22 and ASTM C1231 test methods. These industry-standard certifications ensure that the product meets rigorous quality and safety requirements.
To explore the full line of Concrete Capping and Unbonded Cylinder Capping products, visit our website. We also offer informative blogs that provide essential steps for capping concrete, discuss the benefits of capping compound for concrete cylinder testing, and explain the importance of using unbonded caps for achieving accurate results.
Invest in the Deslauriers 4in Unbonded Capping Neoprene Pad Cap, 60 Duro (20/Box) for reliable and accurate concrete cylinder testing.
