Deslauriers 2in Unbonded Capping Neoprene Pad Cap, 70 Duro (2/Pk)
The Neoprene Compression Pad flows into irregularities and distributes the test load uniformly without creating air pockets to assure consistent breaks. Patented “stay in place” nubs, secure pads into cups.
Compression pads are available in several hardnesses.
50 duro for design strength 1500 to 6000 psi.
60 duro for design strength 2500 to 7000 psi.
70 duro for design strength 4000 to 12,000 psi*.
*Qualifying tests must be performed for strength over 7,000 psi per ASTM.
Refer to ASTM C1231 for max uses, qualification test, etc. Our sales personnel are always available to assist.
2in Neoprene Pads come in 50, 60, or 70 durometer. They are used when testing compressive strength of concrete cylinders and meet ASTM C1231/1231M and AASHTO T 22 standards. The pads are 0.5in (12.7mm) thick and flow during compression to fill irregularities in cylinder ends and ensure uniform load distribution. The 2in Steel Retainer Set are sold separately and required to hold the pads at both ends of the cylinder. Two pads are required. Pads can be used up to 100 times.
Deslauriers 2in Unbonded Capping Neoprene Pad Caps Meets Test Methods:
- AASHTO T22
- ASTM C 1231
View the full line of Concrete Capping and Unbonded Cylinder Capping
The Deslauriers 2in Unbonded Capping Neoprene Pad Cap, 70 Duro (2/Pk) is a reliable and efficient tool for testing the compressive strength of concrete cylinders. These neoprene pads are designed to flow into any irregularities on the surface of the cylinder, ensuring consistent and uniform distribution of the test load. This eliminates the presence of air pockets and guarantees accurate results.
One of the standout features of these neoprene pads is the patented "stay in place" nubs, which securely hold the pads in the cups. This prevents any movement during the testing process, providing stability and reliability. The pads are available in different hardnesses, with the 70 Duro option specifically designed for design strengths ranging from 4000 to 12,000 psi. It is important to note that qualifying strength tests must be performed for strengths exceeding 7,000 psi per ASTM standards.
These 2in neoprene pads meet the strict standards set by ASTM C1231/1231M and AASHTO T 22. They are 0.5in thick and are engineered to flow and fill irregularities on the cylinder ends during compression, ensuring accurate load distribution. The 2in Steel Retainer Set, sold separately, is required to hold the pads firmly at both ends of the cylinder. Two pads, sold in a pack, are required for each testing process. The neoprene pads can be used up to 100 times, offering long-lasting value.
The Deslauriers 2in Unbonded Capping Neoprene Pad Caps are not only designed for high-quality performance, but they also meet the standards required by AASHTO T22 and ASTM C 1231. This ensures that your concrete testing process is accurate and reliable. For additional information or assistance, our knowledgeable sales personnel are always available to answer any questions.
For other concrete capping solutions, be sure to check out our full line of Concrete Capping and Unbonded Cylinder Capping products. And for further educational resources, we have a series of related blogs that cover essential steps for capping concrete, the benefits of capping compound for concrete cylinder testing, and understanding unbonded caps for concrete cylinders to avoid low-strength breaks.
Invest in the Deslauriers 2in Unbonded Capping Neoprene Pad Cap, 70 Duro (2/Pk) for reliable and accurate results in your concrete testing processes.
