Deslauriers 3in Unbonded Capping Neoprene Pad Cap, 70 Duro (2/Pk)
The Neoprene Compression Pad flows into irregularities and distributes the test load uniformly without creating air pockets to assure consistent breaks. Patented “stay in place” nubs, secure pads into cups.
Compression pads are available in several hardnesses.
50 duro for design strength 1500 to 6000 psi.
60 duro for design strength 2500 to 7000 psi.
70 duro for design strength 4000 to 12,000 psi*.
*Qualifying tests must be performed for strength over 7,000 psi per ASTM.
Refer to ASTM C1231 for max uses, qualification test, etc. Our sales personnel are always available to assist.
3in Neoprene Pads come in 50, 60, or 70 durometer. They are used when testing compressive strength of concrete cylinders and meet ASTM C1231/1231M and AASHTO T 22 standards. The pads are 0.5in (12.7mm) thick and flow during compression to fill irregularities in cylinder ends and ensure uniform load distribution. The 3in Steel Retainer Set are sold separately and required to hold the pads at both ends of the cylinder. Two pads are required. Pads can be used up to 100 times.
Deslauriers 3in Unbonded Capping Neoprene Pad Caps Meets Test Methods:
- AASHTO T22
- ASTM C 1231
View the full line of Concrete Capping and Unbonded Cylinder Capping
The Deslauriers 3in Unbonded Capping Neoprene Pad Cap is the perfect solution for testing the compressive strength of concrete cylinders. These high-quality pads are designed to distribute the test load uniformly without creating air pockets, ensuring consistent and reliable results.
With patented "stay in place" nubs, these pads securely fit into cups, preventing any movement or displacement during the testing process. This feature guarantees accurate and precise test results every time.
Available in different hardnesses, these compression pads cater to a range of design strengths, offering options for various testing requirements. The 50 duro pads are suitable for design strengths between 1500 to 6000 psi, while the 60 duro pads are ideal for 2500 to 7000 psi design strengths. For higher design strengths ranging from 4000 to 12,000 psi, the 70 duro pads are the perfect choice. It is important to note that qualifying tests must be performed for strengths above 7000 psi per ASTM standards.
Measuring 3 inches in diameter and 0.5 inches in thickness, these Neoprene pads flow during compression to fill any irregularities in cylinder ends, ensuring uniform load distribution. This guarantees accurate and reliable test results.
To hold the pads securely in place, the 3in Steel Retainer Set is required. These retainers are sold separately and are necessary for holding the pads at both ends of the cylinder. Each cylinder requires two pads.
The Deslauriers 3in Unbonded Capping Neoprene Pad Caps meet the test methods defined by AASHTO T22 and ASTM C 1231. These industry-standard certifications ensure that you are using a reliable and accurate product for your concrete testing needs.
These pads are designed to be used up to 100 times, offering excellent value for money. Refer to ASTM C1231 for maximum usage, qualification tests, and other relevant information. Our knowledgeable sales personnel are always available to assist you with any questions or concerns you may have.
Choose the Deslauriers 3in Unbonded Capping Neoprene Pad Cap for accurate and consistent results in concrete cylinder testing. With its high-quality construction and reliable performance, this product is a must-have for any testing laboratory or construction site.