Thermolyne F6010 Large Muffle Furnace, Max. Temp. 2192F, 14L, 3095W
The Thermolyne Muffle Furnace is used for ashing, ignition tests, gravimetric analyses, and volatile matter determinations. For construction materials, furnaces are used for tests of soils, aggregates, and cement. This unit has rugged components and top quality materials to assure longest service life. The max. temp range for this furnace is 2192F (1200C) and has a chamber capacity is 864in3.
The programmable controller operates like single set-point controllers, except it can be programmed to ramp up or down as well as to dwell for constant temperature periods. This model also features an over-temperature protection. It also has a 2-ramp/2-dwell program capability and a 0.3in (7.6mm) LED digital display in either °C or °F.
Muffle Furnace has a 0.5ft³ (14.2L) capacity and temperature range of 212–2,192°F (100–1,200°C).
This premium large muffle box furnace has a built-in vent port to remove unwanted moisture and contaminants while extending the service life of the heating element and furnace. The unit has thermocouple break protection to cut power to heating elements and prevent thermocouple failure runaway.
Its spacious chamber offers four heating elements on the top, bottom, and each side for enhanced uniformity of temperature. The chamber rear is equipped with a 0.31in (7.8mm) diameter port for monitoring temperature. When the door is opened, a safety switch stops power to the heating elements.
The temperature stability is ±0.3 at 1,000°C, and temperature uniformity is ±2.2 at 1,000°C. Its controller is a digital single setpoint showing actual temperature and setpoint.
Also has multiple elements in sides, tops, and/or bottoms. Since doors and backs have no elements, only the center two-thirds of the chamber is considered uniform in temperature, and chamber size should be selected accordingly. This unit has a ceramic fiber insulation for faster heat-up and reduction of energy consumption. It is also equipped with safety interlock door switches. Power to the elements is automatically cut off when the door is opened. Supplied with a cord and plug.
Accessories:
- Crucible Tongs to safely remove beakers and other labware from the furnace
- Porcelain Crucibles used for loss-on-ignition testing of cement, fly ash, and soils and are available in 10, 30, or 45mL
- Heat Resistant Gloves provide additional operator protection from high temperatures when placing or removing items inside the furnace
Thermo Scientific Furnaces [EU]
Specifications:
Capacity (English) 0.5 cu.ft.
Certifications/Compliance CSA approved
Description F6010
Capacity (Metric) 14.2 L
Temperature (Metric) 100C to 1200C
Type Single Setpoint with Ramp and Programmable
Power Consumption 3095 w
Amps 12.9
Temperature Stability 0.3 at 1000C (2.2 at 1000C)
Dimensions (D x W x H) Interior 10 x 12.8 x 6.8 in. (25 x 33 x 18 cm)
Dimensions (L x W x H) Exterior 20.1 x 19.1 x 21in. (51 x 48.5 x 53.3 cm)
Electrical Requirements 240 50/60 Hz
Voltage 240 V
Frequency 50/60 Hz
View the full line of Thermolyne Furnaces and Carbolite Furnaces
Browse Certified MTP for all the complete line of Lab Ovens, Grieve Ovens Large Capacity Industrial Bench Ovens, Convection Ovens and Benchtop Ovens, Vacuum Ovens, Industrial Furnace Ovens, Gloves-Heat, and Despatch Ovens, kiln for ceramics, including the popular Beaker Tongs, 10in Length
Related Blogs to Industrial Furnace Ovens:
Muffle Furnace: Unlocking the Benefits
Benchtop Muffle Furnaces for Laboratories
The Importance of Material Testing Ovens
Key Considerations for Choosing Your Industrial Oven or Furnace
Ignition Oven: A Guide to NCAT Asphalt Content Furnace Tech
Understanding Rolling Thin Film Oven Testing Equipment
Despatch Oven: The Power of Industrial Ovens and Furnaces
Laboratory Convection Oven: Benefits and Applications
The Benefits of a Lab Convection Oven
Gravity Convection Oven: Unlock the Benefits
Replacing a Sheldon Lab Oven Door Gasket
A Guide to Grieve Ovens and Industrial Oven Manufacturing
An Overview Despatch Oven: The Leader in Industrial Ovens
The Ultimate Guide to Industrial Oven Manufacturers
Find the Perfect Heat Treat Oven for Your Needs
Quincy Lab Ovens: Discover the Benefits
Vacuum Oven: Unlocking the Benefits
The Benefits of a Drying Oven for Industrial Applications
The Benefits of Lab Oven for Heating and Drying
What is Pyrolytic Oven Cleaning and Is It Worth it?
Get the Best Lab Oven for Your Research
Field Oven vs Laboratory Oven: Which is More Accurate?
Industrial Oven: Key Considerations
Finding the Perfect Kiln for Ceramics in Lab and Home
Top Oven for Laboratory: Your Guide to Precise Heating
Top Electric Kilns for Ceramics: Find Your Perfect Match
The Lab Incubator: Parts, Working, Types, and Precautions
