PROOVEit Rapid Chloride Permeability Measuring Cell, 4in

PROOVEit Rapid Chloride Permeability Measuring Cell, 4in

The Rapid Chloride Permeability Cell positions 4x2in or 100x50mm concrete cores or cylinder specimens for testing with Rapid Chloride Permeability Tester. The cell ends have fluid reservoirs, with one end negative and one positive, to measure electrical current flow. The two plexiglass end caps also are equipped with embedded conductive mesh and necessary electrical connections. The specimen is sealed inside the cell by four corner bolts and two internal gaskets. Two connecting wires are included with each cell to connect to the Permeability Tester.

Use with 4in specimens. Sealing Rings adapt to a 4in cell for use with 100mm (3.9in) specimens (sold separately).

Features:

• Holds concrete specimens for rapid chloride permeability testing
• Fluid reservoirs hold 3% sodium chloride solution (negative end) and 0.3N sodium hydroxide solution (positive end)

Included Items:

• Rapid Chloride Permeability Cell (4in or 100mm)
• (2) 4in or 100mm Gaskets
• (2) Connecting wires

Accessories:

• Rapid Chloride Permeability Tester

• Sealing Ring adapts measuring cell for use with 3.9 in (100mm) specimens

• Verification Unit verifies output from the Proove’ It Controller

• Standard Vacuum Chamber can saturate 4 to 6 samples simultaneously

• Large Vacuum Chamber holds up to 20 specimens at one time

• Large Vacuum Pump for use with HMA-286 Large Vacuum Chamber

Meets Test Methods:
ASTM C 1202
AASHTO T 277

View the full line of products for Corrosion Testing Equipment